Level Worldcup CF Mitt
Level Worldcup CF Mitt
Level Worldcup CF Mitt

Level Worldcup CF Mitt

26291A

Sale
Regular price$360.00
/
Shipping calculated at checkout.

Color
Size

Properly fitted ski racing gloves and mitts improve warmth, comfort, pole control, and protection. A glove that is too tight can restrict circulation and reduce warmth, while a glove that is too loose can reduce dexterity and make it harder to maintain a secure grip on the ski pole.

How to measure hand circumference for ski racing gloves and mitts

Measure around the widest part of the hand, excluding the thumb.

Quick Navigation: Sizing | Proper Fit | Fit Notes

How to Measure for Gloves & Mitts

Wrap a flexible measuring tape around the widest part of your hand, typically across the knuckles, while excluding the thumb. Record the measurement in inches and compare it to the manufacturer's size chart.

If your measurement falls between sizes, consider how you prefer your gloves to fit. Racers seeking a close-performance fit often size down, while those prioritizing warmth may prefer sizing up.

General Glove & Mitt Sizing Guidelines

Hand Circumference Typical Size
6–7 in / 15–18 cm Junior Small
7–8 in / 18–20 cm Junior Large / Adult Small
8–9 in / 20–23 cm Adult Medium
9–10 in / 23–25 cm Adult Large
10+ in / 25+ cm Adult XL+
Race Place Tip: Use the pinch test when trying on gloves. You should be able to pinch approximately 1/4 inch (6 mm) of material at the fingertips. This extra space helps maintain circulation and warmth without sacrificing control.

How Gloves & Mitts Should Fit

A properly fitted ski racing glove or mitt should feel snug around the hand while allowing natural finger movement and a secure grip on the ski pole. Most race gloves are pre-curved to match the natural position of the hand while skiing.

  • Fingers should reach close to the end of the glove without pressing firmly against the material.
  • You should be able to comfortably grip a ski pole without excess bunching.
  • The glove should feel secure around the palm and back of the hand.
  • Wrist closures should hold the glove in place without restricting circulation.
  • Mitts should allow slight finger movement inside the insulated compartment.

Common Glove & Mitt Fit Mistakes

  • Choosing gloves that are too tight and restrict circulation.
  • Purchasing gloves that are too large and reduce dexterity.
  • Ignoring the fit while gripping a ski pole.
  • Selecting a size based only on age rather than hand measurements.
  • Overlooking finger length when evaluating overall fit.

Race Place Fit Notes

  • Race gloves are designed to fit closer than recreational ski gloves.
  • Mitts generally provide greater warmth than gloves in cold conditions.
  • Most race gloves are pre-curved to improve pole grip and reduce hand fatigue.
  • Proper circulation is critical for warmth, even in heavily insulated gloves.
  • Fit may vary between brands and models, so always refer to the manufacturer's size chart when available.

Description & Features

The LEVEL Worldcup CF Mitt combines maximum race protection with the added warmth of a mitten for competitive alpine ski racing. Developed for demanding race courses, its protective construction uses Superfabric® reinforcement, 3D protection, and a dynamic ergonomic thumb guard to help absorb impacts from gates and falls. A race-specific palm shape and silicone grip give you a secure, sensitive connection to the ski pole, while the Natural Fit keeps the mitt precise and controlled.

LEVEL's Custom Fit system allows the Worldcup CF Mitt to be heat molded to the shape of your hand for a more personalized race fit. Thinsulate™ insulation, wool lining, and individual finger lining provide a Thermoplus 4000 Very Warm rating for cold training and race days. Graphene helps distribute heat evenly, while Polygiene® treatment helps the lining stay fresh. Waterproof goat leather, Superfabric®, Dyneema stitching, and race-focused reinforcements provide the durability needed for repeated ski racing use.

Key Features

  • Protective ski racing mitt designed for demanding training and race-day conditions
  • Thermoplus 4000 Very Warm rating provides added protection against cold conditions
  • Dynamic ergonomic thumb guard provides flexible support and impact absorption
  • 3D protection technology reinforces exposed areas against ski racing gate impacts
  • Superfabric® reinforcement adds abrasion resistance and durability
  • Custom Fit system allows heat molding to the anatomical shape of your hand
  • Waterproof goat leather construction provides a durable, supple race feel
  • Specific palm cut and silicone grip support precise ski pole control
  • Thinsulate™ insulation and wool lining provide lightweight, breathable warmth
  • Individual finger lining combines mitten warmth with a secure interior fit
  • Graphene lining helps distribute heat evenly throughout the mitt
  • Polygiene® treatment helps control odor during repeated training and race use
  • Dyneema stitching adds strength in demanding race conditions

Specs

  • Use: Alpine Ski Racing
  • Warmth Index: Thermoplus 4000 – Very Warm
  • Fit: Natural Fit
  • Cuff: Hybrid
  • Shell: Waterproof Goat Leather, Superfabric®
  • Palm: Waterproof Goat Leather
  • Insulation: Thinsulate™
  • Lining: Wool with Polygiene® Treatment, Graphene, Individual Finger Lining
  • Protection: Special Gate Protection, Dynamic Thumb Guard, 3D Protection
  • Grip: Silicone Grip
  • Stitching: Dyneema

Construction & Technology

Custom Fit

LEVEL's Custom Fit system uses thermo-formable material that can be heated and molded to the anatomical shape of your hand. The process can be repeated when needed to maintain a personalized fit and close connection to the ski pole.

Dynamic Ergonomic Thumb Protection

The Worldcup CF Mitt uses LEVEL's ergonomic thumb construction to combine dynamic support with flexibility and built-in shock absorption. The design helps protect the thumb during impacts without unnecessarily restricting movement.

3D Protection Technology

Race-focused 3D protection reinforces exposed areas of the mitt to help shield your hand from the repeated impacts encountered during alpine ski racing.

Superfabric®

Superfabric® reinforcement increases abrasion resistance and durability in high-wear areas, helping the mitt withstand repeated contact with gates and hard snow.

Graphene Lining

Graphene helps distribute heat evenly through the lining for more consistent thermoregulation. LEVEL also specifies the material as breathable and antibacterial.

Thinsulate™ Insulation

Fine Thinsulate™ microfibers efficiently trap insulating air to provide warmth without excessive bulk, helping maintain the control needed for ski racing.

Wool Lining with Polygiene®

Wool provides natural insulation, breathability, and moisture absorption. Polygiene® Stays Fresh treatment helps reduce odor buildup through repeated days of ski race training and competition.

Individual Finger Lining

Separate internal finger compartments provide a more secure fit inside the mitten while retaining the warmth and protective coverage of the mitt construction.

Dyneema Stitching

High-strength Dyneema stitching reinforces the race construction for added durability under demanding training and competition use.

Specific Palm Cut

The race-specific palm shape is designed to improve sensitivity and make it easier to maintain a secure, natural grip around the ski pole.


Recently viewed