Level Worldcup JR CF Mitt
Level Worldcup JR CF Mitt
Level Worldcup JR CF Mitt

Level Worldcup JR CF Mitt

26298A

Sale
Regular price$250.00
/
Shipping calculated at checkout.

Color
Size

Properly fitted ski racing gloves and mitts improve warmth, comfort, pole control, and protection. A glove that is too tight can restrict circulation and reduce warmth, while a glove that is too loose can reduce dexterity and make it harder to maintain a secure grip on the ski pole.

How to measure hand circumference for ski racing gloves and mitts

Measure around the widest part of the hand, excluding the thumb.

Quick Navigation: Sizing | Proper Fit | Fit Notes

How to Measure for Gloves & Mitts

Wrap a flexible measuring tape around the widest part of your hand, typically across the knuckles, while excluding the thumb. Record the measurement in inches and compare it to the manufacturer's size chart.

If your measurement falls between sizes, consider how you prefer your gloves to fit. Racers seeking a close-performance fit often size down, while those prioritizing warmth may prefer sizing up.

General Glove & Mitt Sizing Guidelines

Hand Circumference Typical Size
6–7 in / 15–18 cm Junior Small
7–8 in / 18–20 cm Junior Large / Adult Small
8–9 in / 20–23 cm Adult Medium
9–10 in / 23–25 cm Adult Large
10+ in / 25+ cm Adult XL+
Race Place Tip: Use the pinch test when trying on gloves. You should be able to pinch approximately 1/4 inch (6 mm) of material at the fingertips. This extra space helps maintain circulation and warmth without sacrificing control.

How Gloves & Mitts Should Fit

A properly fitted ski racing glove or mitt should feel snug around the hand while allowing natural finger movement and a secure grip on the ski pole. Most race gloves are pre-curved to match the natural position of the hand while skiing.

  • Fingers should reach close to the end of the glove without pressing firmly against the material.
  • You should be able to comfortably grip a ski pole without excess bunching.
  • The glove should feel secure around the palm and back of the hand.
  • Wrist closures should hold the glove in place without restricting circulation.
  • Mitts should allow slight finger movement inside the insulated compartment.

Common Glove & Mitt Fit Mistakes

  • Choosing gloves that are too tight and restrict circulation.
  • Purchasing gloves that are too large and reduce dexterity.
  • Ignoring the fit while gripping a ski pole.
  • Selecting a size based only on age rather than hand measurements.
  • Overlooking finger length when evaluating overall fit.

Race Place Fit Notes

  • Race gloves are designed to fit closer than recreational ski gloves.
  • Mitts generally provide greater warmth than gloves in cold conditions.
  • Most race gloves are pre-curved to improve pole grip and reduce hand fatigue.
  • Proper circulation is critical for warmth, even in heavily insulated gloves.
  • Fit may vary between brands and models, so always refer to the manufacturer's size chart when available.

Description & Features

The LEVEL Worldcup JR CF Mitt gives junior alpine ski racers the warmth and protection needed for demanding ski race training and competition. Special gate protection and Superfabric® reinforcement help protect the hand from repeated gate contact, while waterproof goat leather provides a durable, supple feel. A silicone palm grip helps young racers maintain secure ski pole control without adding unnecessary bulk.

Built for cold race days, the LEVEL Worldcup JR CF Mitt carries a Thermoplus 4000 Very Warm rating with Thinsulate™ insulation and a wool lining. Polygiene® treatment helps the lining stay fresh through repeated use, while LEVEL's Custom Fit system allows the mitt to be heat molded for a more personalized fit. Durashield reinforces the back against abrasion, and sizes 6, 7, and 8 include individual finger lining inside the mitt for a more secure feel.

Key Features

  • Junior ski racing mitt designed for warmth, protection, and pole control
  • Special gate protection helps shield the hand from impacts during alpine ski racing
  • Superfabric® reinforcement adds abrasion resistance in exposed areas
  • Custom Fit system allows heat molding to the anatomical shape of the hand
  • Waterproof goat leather provides durable protection and a supple feel
  • Waterproof goat leather palm provides durability in a high-wear area
  • Silicone grip helps maintain secure ski pole control
  • Thinsulate™ insulation provides efficient warmth without excessive bulk
  • Wool lining provides natural insulation and breathability
  • Polygiene® treatment helps the lining stay fresh through repeated use
  • Durashield protects the back of the mitt against abrasion and wear
  • Individual finger lining in sizes 6, 7, and 8 provides a more secure interior fit

Specs

  • Use: Junior Alpine Ski Racing
  • Warmth Index: Thermoplus 4000 – Very Warm
  • Fit: Natural Fit
  • Cuff: Hybrid
  • Shell: Waterproof Goat Leather, Superfabric®
  • Palm: Waterproof Goat Leather
  • Insulation: Thinsulate™
  • Lining: Wool with Polygiene® Treatment
  • Protection: Special Gate Protection, Superfabric® Reinforcement
  • Grip: Silicone Grip

Construction & Technology

Special Gate Protection

Race-focused protection helps shield a junior racer's hand from the repeated gate contact encountered during alpine ski racing and ski race training.

Superfabric® Reinforcement

Superfabric® reinforces exposed areas of the mitt to increase abrasion resistance and durability during repeated race-course use.

Custom Fit

LEVEL's Custom Fit system uses thermo-formable material that can be heated and molded to the anatomical shape of the hand. The process can be repeated when needed to maintain a personalized fit.

Waterproof Goat Leather

Soft waterproof goat leather combines durability with a supple feel and is used throughout the shell and palm to provide protection in areas exposed to abrasion.

Thinsulate™ Insulation

Fine Thinsulate™ microfibers efficiently trap insulating air, providing warmth without unnecessary bulk for cold days at the ski race venue.

Wool Lining with Polygiene®

Wool provides natural insulation, breathability, and moisture absorption. Polygiene® Stays Fresh treatment helps reduce odor buildup during repeated training and race use.

Durashield

Durashield adds a transparent anti-abrasion protective layer to the back of the mitt, helping improve durability in an area exposed to repeated wear.

Individual Finger Lining

Sizes 6, 7, and 8 include separate internal finger compartments for a more secure feel inside the mitt while retaining the warmth and coverage of a mitten construction.


Recently viewed