Level SQ CF Mitt
Level SQ CF Mitt
Level SQ CF Mitt
Level SQ CF Mitt

Level SQ CF Mitt

26295A

Sale
Regular price$300.00
/
Shipping calculated at checkout.

Color
Size

Properly fitted ski racing gloves and mitts improve warmth, comfort, pole control, and protection. A glove that is too tight can restrict circulation and reduce warmth, while a glove that is too loose can reduce dexterity and make it harder to maintain a secure grip on the ski pole.

How to measure hand circumference for ski racing gloves and mitts

Measure around the widest part of the hand, excluding the thumb.

Quick Navigation: Sizing | Proper Fit | Fit Notes

How to Measure for Gloves & Mitts

Wrap a flexible measuring tape around the widest part of your hand, typically across the knuckles, while excluding the thumb. Record the measurement in inches and compare it to the manufacturer's size chart.

If your measurement falls between sizes, consider how you prefer your gloves to fit. Racers seeking a close-performance fit often size down, while those prioritizing warmth may prefer sizing up.

General Glove & Mitt Sizing Guidelines

Hand Circumference Typical Size
6–7 in / 15–18 cm Junior Small
7–8 in / 18–20 cm Junior Large / Adult Small
8–9 in / 20–23 cm Adult Medium
9–10 in / 23–25 cm Adult Large
10+ in / 25+ cm Adult XL+
Race Place Tip: Use the pinch test when trying on gloves. You should be able to pinch approximately 1/4 inch (6 mm) of material at the fingertips. This extra space helps maintain circulation and warmth without sacrificing control.

How Gloves & Mitts Should Fit

A properly fitted ski racing glove or mitt should feel snug around the hand while allowing natural finger movement and a secure grip on the ski pole. Most race gloves are pre-curved to match the natural position of the hand while skiing.

  • Fingers should reach close to the end of the glove without pressing firmly against the material.
  • You should be able to comfortably grip a ski pole without excess bunching.
  • The glove should feel secure around the palm and back of the hand.
  • Wrist closures should hold the glove in place without restricting circulation.
  • Mitts should allow slight finger movement inside the insulated compartment.

Common Glove & Mitt Fit Mistakes

  • Choosing gloves that are too tight and restrict circulation.
  • Purchasing gloves that are too large and reduce dexterity.
  • Ignoring the fit while gripping a ski pole.
  • Selecting a size based only on age rather than hand measurements.
  • Overlooking finger length when evaluating overall fit.

Race Place Fit Notes

  • Race gloves are designed to fit closer than recreational ski gloves.
  • Mitts generally provide greater warmth than gloves in cold conditions.
  • Most race gloves are pre-curved to improve pole grip and reduce hand fatigue.
  • Proper circulation is critical for warmth, even in heavily insulated gloves.
  • Fit may vary between brands and models, so always refer to the manufacturer's size chart when available.

Description & Features

The LEVEL SQ CF Mitt combines serious gate protection with the warmth of a mitten for competitive alpine ski racing. 3D knuckle protection and Superfabric® reinforcement help shield your hand from repeated gate impacts, while waterproof goat leather provides a durable, supple feel. A race-specific palm shape and silicone grip give you secure ski pole control through training runs and race day.

Built for cold conditions, the LEVEL SQ CF Mitt carries a Thermoplus 4000 Very Warm rating with Thinsulate™ insulation, wool lining, and individual finger lining inside the mitt. LEVEL's Custom Fit system allows the mitt to be heat molded to the shape of your hand, while Graphene lining helps distribute warmth evenly. Polygiene® treatment, Dyneema stitching, and Durashield cuff reinforcement round out a race-focused construction built for demanding use.

Key Features

  • Protective ski racing mitt designed for cold training and race-day conditions
  • Thermoplus 4000 Very Warm rating provides added warmth for cold race venues
  • 3D knuckle protection helps shield the hand from repeated gate impacts
  • Superfabric® reinforcement increases abrasion resistance in exposed areas
  • Custom Fit system allows heat molding to the anatomical shape of your hand
  • Waterproof goat leather provides a durable, supple race construction
  • Race-specific palm shape and silicone grip support secure ski pole control
  • Thinsulate™ insulation and wool lining provide efficient, breathable warmth
  • Individual finger lining provides a secure interior fit within the mitten
  • Graphene lining helps distribute heat evenly across the hand
  • Polygiene® treatment helps the lining stay fresh through repeated use
  • Dyneema stitching adds strength for demanding alpine ski racing
  • Durashield reinforcement protects the back cuff against abrasion and wear

Specs

  • Use: Alpine Ski Racing
  • Warmth Index: Thermoplus 4000 – Very Warm
  • Fit: Natural Fit
  • Cuff: Hybrid
  • Shell: Waterproof Goat Leather, Superfabric®
  • Palm: Waterproof Goat Leather
  • Insulation: Thinsulate™
  • Lining: Wool with Polygiene® Treatment, Graphene, Individual Finger Lining
  • Protection: 3D Knuckle Protection
  • Grip: Silicone Grip
  • Stitching: Dyneema

Construction & Technology

3D Knuckle Protection

Armored 3D protection over the knuckles helps protect an exposed area of the hand from the repeated gate contact encountered during alpine ski racing.

Custom Fit

LEVEL's Custom Fit system uses thermo-formable material that can be heated and molded to the anatomical shape of your hand. The process can be repeated when needed to maintain a personalized race fit.

Superfabric®

Superfabric® reinforcement adds abrasion resistance and durability to high-wear areas of the mitt, helping the protective backhand withstand demanding race use.

Waterproof Goat Leather

Soft waterproof goat leather combines durability with a supple feel. LEVEL uses it in areas exposed to high abrasion, including the palm and the area between the thumb and index finger.

Graphene Lining

Graphene helps distribute heat evenly through the lining for consistent thermoregulation. LEVEL also specifies the material as breathable and antibacterial.

Thinsulate™ Insulation

Fine Thinsulate™ microfibers efficiently trap insulating air to provide warmth without unnecessary bulk, supporting the warmth and control required for ski racing.

Wool Lining with Polygiene®

Wool provides natural insulation, breathability, and moisture absorption. Polygiene® Stays Fresh treatment helps reduce odor buildup through repeated training and race use.

Individual Finger Lining

Separate internal finger compartments provide a secure fit inside the mitt while maintaining the warmth and protective coverage of a mitten construction.

Dyneema Stitching

High-strength Dyneema stitching reinforces the race construction for added durability during demanding training and competition.

Durashield

Durashield is a transparent protective layer with an anti-abrasion treatment applied to the back cuff, helping protect the mitt from repeated wear.

Specific Palm Cut

The race-specific palm shape is designed to improve sensitivity and provide a more natural, secure grip around the ski pole.


Recently viewed