Level SQ CF Glove
Level SQ CF Glove
Level SQ CF Glove

Level SQ CF Glove

26293A

Sale
Regular price$300.00
/
Shipping calculated at checkout.

Color
Size

Properly fitted ski racing gloves and mitts improve warmth, comfort, pole control, and protection. A glove that is too tight can restrict circulation and reduce warmth, while a glove that is too loose can reduce dexterity and make it harder to maintain a secure grip on the ski pole.

How to measure hand circumference for ski racing gloves and mitts

Measure around the widest part of the hand, excluding the thumb.

Quick Navigation: Sizing | Proper Fit | Fit Notes

How to Measure for Gloves & Mitts

Wrap a flexible measuring tape around the widest part of your hand, typically across the knuckles, while excluding the thumb. Record the measurement in inches and compare it to the manufacturer's size chart.

If your measurement falls between sizes, consider how you prefer your gloves to fit. Racers seeking a close-performance fit often size down, while those prioritizing warmth may prefer sizing up.

General Glove & Mitt Sizing Guidelines

Hand Circumference Typical Size
6–7 in / 15–18 cm Junior Small
7–8 in / 18–20 cm Junior Large / Adult Small
8–9 in / 20–23 cm Adult Medium
9–10 in / 23–25 cm Adult Large
10+ in / 25+ cm Adult XL+
Race Place Tip: Use the pinch test when trying on gloves. You should be able to pinch approximately 1/4 inch (6 mm) of material at the fingertips. This extra space helps maintain circulation and warmth without sacrificing control.

How Gloves & Mitts Should Fit

A properly fitted ski racing glove or mitt should feel snug around the hand while allowing natural finger movement and a secure grip on the ski pole. Most race gloves are pre-curved to match the natural position of the hand while skiing.

  • Fingers should reach close to the end of the glove without pressing firmly against the material.
  • You should be able to comfortably grip a ski pole without excess bunching.
  • The glove should feel secure around the palm and back of the hand.
  • Wrist closures should hold the glove in place without restricting circulation.
  • Mitts should allow slight finger movement inside the insulated compartment.

Common Glove & Mitt Fit Mistakes

  • Choosing gloves that are too tight and restrict circulation.
  • Purchasing gloves that are too large and reduce dexterity.
  • Ignoring the fit while gripping a ski pole.
  • Selecting a size based only on age rather than hand measurements.
  • Overlooking finger length when evaluating overall fit.

Race Place Fit Notes

  • Race gloves are designed to fit closer than recreational ski gloves.
  • Mitts generally provide greater warmth than gloves in cold conditions.
  • Most race gloves are pre-curved to improve pole grip and reduce hand fatigue.
  • Proper circulation is critical for warmth, even in heavily insulated gloves.
  • Fit may vary between brands and models, so always refer to the manufacturer's size chart when available.

Description & Features

The LEVEL SQ CF Glove is built for alpine ski racers who need protection, precision, and a secure pole grip. The 2026–27 design increases Superfabric® protection across the backhand and thumb to help withstand repeated gate impacts, while knuckle protection reinforces another key contact zone. Waterproof goat leather and a race-specific palm shape provide a durable, responsive feel for ski race training and competition.

LEVEL's Custom Fit system allows the SQ CF Glove to be heat molded to the anatomical shape of your hand for a more personalized fit. Thinsulate™ insulation and wool lining provide a Thermoplus 3000 Warm rating, while Graphene helps distribute heat evenly and Polygiene® treatment helps the lining stay fresh. Outside stitching, Dyneema stitching, silicone grip, and Durashield cuff reinforcement complete a race-focused glove designed for demanding days on course.

Key Features

  • Protective alpine ski racing glove designed for training and competition
  • Increased Superfabric® coverage on the backhand and thumb helps resist gate impacts and abrasion
  • Knuckle protection reinforces a key impact zone during ski racing
  • Custom Fit system allows heat molding to the anatomical shape of your hand
  • Waterproof goat leather provides a durable, supple race feel
  • Race-specific palm shape improves sensitivity and ski pole grip
  • Outside stitching supports a precise fit and direct pole feel
  • Thinsulate™ insulation and wool lining provide balanced race-day warmth
  • Graphene lining helps distribute heat evenly throughout the glove
  • Polygiene® treatment helps keep the lining fresh through repeated use
  • Silicone grip improves security around the ski pole
  • Dyneema stitching adds strength and durability for demanding race use
  • Durashield protects the back cuff against abrasion and wear

Specs

  • Use: Alpine Ski Racing
  • Warmth Index: Thermoplus 3000 – Warm
  • Fit: Natural Fit
  • Cuff: Hybrid
  • Shell: Waterproof Goat Leather, Superfabric®
  • Palm: Waterproof Goat Leather
  • Insulation: Thinsulate™
  • Lining: Wool with Polygiene® Treatment, Graphene
  • Protection: Knuckle, Backhand and Thumb Protection
  • Grip: Silicone Grip
  • Stitching: Dyneema

Construction & Technology

Superfabric® Protection

Superfabric® reinforces the backhand and thumb to improve abrasion resistance and durability in areas exposed to gate contact. LEVEL increased this protective coverage for the 2026–27 SQ CF generation.

Knuckle Protection

Protective reinforcement over the knuckles helps shield an exposed area of the hand from impacts encountered during alpine ski racing.

Custom Fit

LEVEL's Custom Fit system uses thermo-formable material that can be heated and molded to the anatomical shape of your hand. The process can be repeated to maintain a personalized fit.

Waterproof Goat Leather

Soft waterproof goat leather combines durability with a supple feel. LEVEL uses it in high-abrasion areas such as the palm and between the thumb and index finger.

Specific Palm Cut

The race-specific palm shape is designed to improve sensitivity and make it easier to maintain a secure, natural grip around the ski pole.

Graphene Lining

Graphene helps distribute heat evenly throughout the lining for consistent thermoregulation. LEVEL also specifies the material as breathable and antibacterial.

Thinsulate™ Insulation

Fine Thinsulate™ microfibers efficiently trap insulating air to provide warmth without excessive bulk, helping maintain the dexterity needed for ski racing.

Wool Lining with Polygiene®

Wool provides natural insulation, breathability, and moisture absorption. Polygiene® Stays Fresh treatment helps reduce odor buildup during repeated ski race training and competition.

Dyneema Stitching

High-strength Dyneema stitching reinforces the glove's race construction for added durability while supporting a precise fit and secure pole grip.

Durashield

Durashield adds a transparent anti-abrasion protective layer to the back cuff to help protect this high-wear area during repeated race use.


Recently viewed