Leki WCR PRO TR Mitt
Leki WCR PRO TR Mitt
Leki WCR PRO TR Mitt
Leki WCR PRO TR Mitt
Leki WCR PRO TR Mitt
Leki WCR PRO TR Mitt
Leki WCR PRO TR Mitt
Leki WCR PRO TR Mitt
Leki WCR PRO TR Mitt

Leki WCR PRO TR Mitt

26256A

Racer Price
Regular price $350.00 Sale price$265.00 Save 24%
/
Shipping calculated at checkout.

Color
Size

Properly fitted ski racing gloves and mitts improve warmth, comfort, pole control, and protection. A glove that is too tight can restrict circulation and reduce warmth, while a glove that is too loose can reduce dexterity and make it harder to maintain a secure grip on the ski pole.

How to measure hand circumference for ski racing gloves and mitts

Measure around the widest part of the hand, excluding the thumb.

Quick Navigation: Sizing | Proper Fit | Fit Notes

How to Measure for Gloves & Mitts

Wrap a flexible measuring tape around the widest part of your hand, typically across the knuckles, while excluding the thumb. Record the measurement in inches and compare it to the manufacturer's size chart.

If your measurement falls between sizes, consider how you prefer your gloves to fit. Racers seeking a close-performance fit often size down, while those prioritizing warmth may prefer sizing up.

General Glove & Mitt Sizing Guidelines

Hand Circumference Typical Size
6–7 in / 15–18 cm Junior Small
7–8 in / 18–20 cm Junior Large / Adult Small
8–9 in / 20–23 cm Adult Medium
9–10 in / 23–25 cm Adult Large
10+ in / 25+ cm Adult XL+
Race Place Tip: Use the pinch test when trying on gloves. You should be able to pinch approximately 1/4 inch (6 mm) of material at the fingertips. This extra space helps maintain circulation and warmth without sacrificing control.

How Gloves & Mitts Should Fit

A properly fitted ski racing glove or mitt should feel snug around the hand while allowing natural finger movement and a secure grip on the ski pole. Most race gloves are pre-curved to match the natural position of the hand while skiing.

  • Fingers should reach close to the end of the glove without pressing firmly against the material.
  • You should be able to comfortably grip a ski pole without excess bunching.
  • The glove should feel secure around the palm and back of the hand.
  • Wrist closures should hold the glove in place without restricting circulation.
  • Mitts should allow slight finger movement inside the insulated compartment.

Common Glove & Mitt Fit Mistakes

  • Choosing gloves that are too tight and restrict circulation.
  • Purchasing gloves that are too large and reduce dexterity.
  • Ignoring the fit while gripping a ski pole.
  • Selecting a size based only on age rather than hand measurements.
  • Overlooking finger length when evaluating overall fit.

Race Place Fit Notes

  • Race gloves are designed to fit closer than recreational ski gloves.
  • Mitts generally provide greater warmth than gloves in cold conditions.
  • Most race gloves are pre-curved to improve pole grip and reduce hand fatigue.
  • Proper circulation is critical for warmth, even in heavily insulated gloves.
  • Fit may vary between brands and models, so always refer to the manufacturer's size chart when available.

Description & Features

The LEKI WCR PRO TR Mitts are built for alpine ski racers who want maximum warmth without giving up secure pole control or race-specific hand protection. Race Fit construction with an advanced pre-curve positions the hand naturally around the pole, while the integrated Speed Panel and surrounding cushioning help absorb impacts during demanding gate training and competition.

A durable Ceramic Shell combines with a premium goatskin palm for abrasion resistance, grip, and a supple feel on the pole. Hyperloft and Thinsulate insulation provide LEKI's highest warmth rating, while internal Finger Channels improve fit and heat retention inside the mitt. A Micro Bemberg lining and flexible neoprene cuff complete the cold-weather race construction.

Key Features

  • Mitten construction provides extra warmth for cold-weather race training and competition
  • Internal Finger Channels improve fit while helping retain warmth
  • Race-specific hand protection helps absorb impacts during gate contact
  • Advanced pre-curve supports a secure grip and efficient power transfer to the pole
  • Flexible silicone cushioning provides protection without unnecessarily restricting hand movement
  • Ceramic-reinforced outer material improves abrasion resistance in high-wear areas
  • Goatskin palm provides durable, supple contact with the pole grip
  • Trigger System creates a direct mitt-to-pole connection with compatible LEKI Trigger 3D poles
  • Water-resistant components provide protection against typical winter conditions

Specs

  • Use: Alpine ski racing and race training
  • Fit: Race Fit with advanced pre-curve
  • Main Material: Ceramic Shell, 100% polyester
  • Palm: Premium goatskin, 100% leather
  • Cuff: Neoprene, 60% rubber / 40% polyester
  • Insulation: Hyperloft, 100% polyester; Thinsulate, 65% polyolefin / 35% polyester
  • Lining: Micro Bemberg, 100% polyester
  • Waterproof Level: 3/5 – water-resistant components
  • Warmth Level: 5/5 – Extra Warm

Construction & Technology

Trigger System

The Trigger System creates a direct connection between the mitt and compatible LEKI Trigger 3D poles. Racers gain precise pole control along with fast clicking in and out without relying on a conventional strap setup.

Speed System

The Speed System is engineered for added flexibility around the grip, making it easier to control the pole and make fast grip adjustments during racing.

Speed Panel

A fully integrated flexible TPU panel covers the central knuckle area to provide impact damping. Its flowing shape follows the ergonomics of the hand while maintaining the mobility needed for aggressive pole handling.

Silicone Surround Cushion

Flexible polygonal silicone pads and additional EVA padding surround the Speed Panel, extending cushioning around the hand for greater all-around impact protection.

Pro Glide Zone

Panels and cushioning transition smoothly without pronounced edges, creating a streamlined surface designed to improve gliding during contact with gates or the snow.

Ceramic Shell

A high-abrasion-resistant ceramic print reinforces the mitt's outer surface. This added durability is particularly useful for racers whose hand protection regularly encounters gates and other high-wear conditions.

Grip Zone

The ergonomically shaped palm incorporates silicone reinforcement to increase grip where the hand contacts the pole, supporting consistent control through starts, turns, and pole plants.

Race Fit

LEKI's Race Fit combines a close-fitting cut with advanced pre-curve construction. The shaped design positions the hand naturally around the pole grip for efficient power transfer and precise handling.

Finger Channels

Finger-shaped internal channels are built into the mitt lining to position each finger individually. This improves fit and control while retaining the warmth advantage of the surrounding mitten construction.

Flex Cuff

The flexible neoprene cuff makes the mitt easier to put on and remove while allowing a close, individually adjustable fit around the wrist.

Premium Goatskin

High-quality goatskin provides a hard-wearing yet supple palm surface, giving racers durable grip and natural flexibility around the pole.

Hyperloft & Thinsulate Insulation

High-loft synthetic insulation traps air to retain warmth while using hydrophobic fibers suited to winter conditions. The combination supports the mitt's Extra Warm rating for cold training sessions, lift rides, and race-day waiting periods.

Micro Bemberg Lining

The hydrophobic Micro Bemberg lining is soft, warm, and fast drying, helping maintain interior comfort through long days of training and competition.


Recently viewed