Leki WCR CORE TR Gloves
Leki WCR CORE TR Gloves
Leki WCR CORE TR Gloves
Leki WCR CORE TR Gloves
Leki WCR CORE TR Gloves
Leki WCR CORE TR Gloves
Leki WCR CORE TR Gloves
Leki WCR CORE TR Gloves

Leki WCR CORE TR Gloves

26258A

Racer Price
Regular price $240.00 Sale price$180.00 Save 25%
/
Shipping calculated at checkout.

Color
Size

Properly fitted ski racing gloves and mitts improve warmth, comfort, pole control, and protection. A glove that is too tight can restrict circulation and reduce warmth, while a glove that is too loose can reduce dexterity and make it harder to maintain a secure grip on the ski pole.

How to measure hand circumference for ski racing gloves and mitts

Measure around the widest part of the hand, excluding the thumb.

Quick Navigation: Sizing | Proper Fit | Fit Notes

How to Measure for Gloves & Mitts

Wrap a flexible measuring tape around the widest part of your hand, typically across the knuckles, while excluding the thumb. Record the measurement in inches and compare it to the manufacturer's size chart.

If your measurement falls between sizes, consider how you prefer your gloves to fit. Racers seeking a close-performance fit often size down, while those prioritizing warmth may prefer sizing up.

General Glove & Mitt Sizing Guidelines

Hand Circumference Typical Size
6–7 in / 15–18 cm Junior Small
7–8 in / 18–20 cm Junior Large / Adult Small
8–9 in / 20–23 cm Adult Medium
9–10 in / 23–25 cm Adult Large
10+ in / 25+ cm Adult XL+
Race Place Tip: Use the pinch test when trying on gloves. You should be able to pinch approximately 1/4 inch (6 mm) of material at the fingertips. This extra space helps maintain circulation and warmth without sacrificing control.

How Gloves & Mitts Should Fit

A properly fitted ski racing glove or mitt should feel snug around the hand while allowing natural finger movement and a secure grip on the ski pole. Most race gloves are pre-curved to match the natural position of the hand while skiing.

  • Fingers should reach close to the end of the glove without pressing firmly against the material.
  • You should be able to comfortably grip a ski pole without excess bunching.
  • The glove should feel secure around the palm and back of the hand.
  • Wrist closures should hold the glove in place without restricting circulation.
  • Mitts should allow slight finger movement inside the insulated compartment.

Common Glove & Mitt Fit Mistakes

  • Choosing gloves that are too tight and restrict circulation.
  • Purchasing gloves that are too large and reduce dexterity.
  • Ignoring the fit while gripping a ski pole.
  • Selecting a size based only on age rather than hand measurements.
  • Overlooking finger length when evaluating overall fit.

Race Place Fit Notes

  • Race gloves are designed to fit closer than recreational ski gloves.
  • Mitts generally provide greater warmth than gloves in cold conditions.
  • Most race gloves are pre-curved to improve pole grip and reduce hand fatigue.
  • Proper circulation is critical for warmth, even in heavily insulated gloves.
  • Fit may vary between brands and models, so always refer to the manufacturer's size chart when available.

Description & Features

The LEKI WCR CORE TR Gloves give alpine ski racers a warm, waterproof glove with race-specific protection and precise pole control. Race Fit construction uses an advanced pre-curve to position the fingers naturally around the grip, while strategically placed EVA padding helps protect the hands during gate training and competition.

A combination of Ceramic Shell and stretch softshell balances abrasion resistance with mobility, while premium goatskin and PU palm materials provide durable contact with the pole. The SOFT-TEX® membrane blocks water and wind while remaining breathable, and Hyperloft insulation with a Micro Bemberg lining provides LEKI's Extra Warm level of cold-weather protection.

Key Features

  • Waterproof and windproof construction provides reliable weather protection for training and race days
  • Race Fit with advanced finger pre-curve supports a secure grip and efficient pole control
  • Ceramic-reinforced EVA padding provides race-specific cushioning against impacts
  • Silicone-reinforced grip pads increase security at the pole interface
  • Combination of Ceramic Shell and stretch softshell provides durability with freedom of movement
  • Premium goatskin and PU palm construction balances grip, durability, and flexibility
  • Trigger compatibility provides a direct connection with compatible LEKI Trigger poles
  • Flex Cuff and Cuff Pull make the gloves easier to put on and adjust around the wrist
  • Extra Warm insulation is suited to cold training sessions, lift rides, and race-day waiting periods

Specs

  • Use: Alpine ski racing and race training
  • Fit: Race Fit with advanced pre-curve
  • Main Material: Ceramic Shell, 100% polyester; softshell, 92% polyester / 8% elastane
  • Palm: PU, 100% polyurethane; Premium Goatskin, 100% leather
  • Cuff: Neoprene, 60% rubber / 40% polyester
  • Membrane: SOFT-TEX®, 100% thermoplastic polyurethane
  • Insulation: Hyperloft, 100% polyester
  • Lining: Micro Bemberg, 100% polyester
  • Waterproof Level: 4/5 – Waterproof
  • Warmth Level: 5/5 – Extra Warm

Construction & Technology

Trigger System

The Trigger System provides a direct connection between the glove and compatible LEKI Trigger poles. This integrated interface supports precise pole control while letting racers quickly connect to and release from the pole.

SOFT-TEX®

SOFT-TEX® is a high-quality membrane insert engineered to be waterproof, windproof, and highly breathable. Its soft construction maintains a comfortable feel while protecting racers from snow, moisture, and wind during long training sessions and race days.

Race Fit

LEKI's Race Fit combines a close-fitting shape with an advanced finger pre-curve. The glove naturally follows the hand's gripping position for secure pole contact and efficient power transfer.

Ceramic Shell

Ceramic Shell reinforces high-wear areas of the glove with a robust surface designed for increased abrasion resistance, helping the glove withstand repeated use in demanding race environments.

Ceramic Enforced EVA Paddings

EVA padding reinforced with abrasion-resistant ceramic material adds cushioning and durability in exposed areas of the hand, providing additional protection during gate contact.

Silicone Enforced Grip Pads

Silicone reinforcement at the grip area increases traction between the glove and pole, helping racers maintain consistent control through starts, turns, and pole plants.

Flex Cuff

The flexible neoprene cuff makes the glove easier to put on and remove while allowing a close fit around the wrist for comfortable race-day use.

Premium Goatskin

Premium goatskin adds a durable and supple contact surface to the palm, supporting secure grip and natural hand movement around the pole.

Hyperloft Insulation

Hyperloft uses fine synthetic fibers to create insulating air pockets that retain warmth. Its hydrophobic construction supports reliable thermal performance in winter conditions while contributing to the glove's Extra Warm rating.

Micro Bemberg Lining

Micro Bemberg provides a soft, warm interior that is hydrophobic and fast drying, helping maintain comfort through cold training sessions and competition.


Recently viewed