Leki JR WCR Venom 3D Mitts
Leki JR WCR Venom 3D Mitts
Leki JR WCR Venom 3D Mitts
Leki JR WCR Venom 3D Mitts
Leki JR WCR Venom 3D Mitts
Leki JR WCR Venom 3D Mitts
Leki JR WCR Venom 3D Mitts
Leki JR WCR Venom 3D Mitts

Leki JR WCR Venom 3D Mitts

26264A

Racer Price
Regular price $260.00 Sale price$195.00 Save 25%
/
Shipping calculated at checkout.

Color
Size
  • Low stock - 3 items left
  • Backordered, shipping soon

Properly fitted ski racing gloves and mitts improve warmth, comfort, pole control, and protection. A glove that is too tight can restrict circulation and reduce warmth, while a glove that is too loose can reduce dexterity and make it harder to maintain a secure grip on the ski pole.

How to measure hand circumference for ski racing gloves and mitts

Measure around the widest part of the hand, excluding the thumb.

Quick Navigation: Sizing | Proper Fit | Fit Notes

How to Measure for Gloves & Mitts

Wrap a flexible measuring tape around the widest part of your hand, typically across the knuckles, while excluding the thumb. Record the measurement in inches and compare it to the manufacturer's size chart.

If your measurement falls between sizes, consider how you prefer your gloves to fit. Racers seeking a close-performance fit often size down, while those prioritizing warmth may prefer sizing up.

General Glove & Mitt Sizing Guidelines

Hand Circumference Typical Size
6–7 in / 15–18 cm Junior Small
7–8 in / 18–20 cm Junior Large / Adult Small
8–9 in / 20–23 cm Adult Medium
9–10 in / 23–25 cm Adult Large
10+ in / 25+ cm Adult XL+
Race Place Tip: Use the pinch test when trying on gloves. You should be able to pinch approximately 1/4 inch (6 mm) of material at the fingertips. This extra space helps maintain circulation and warmth without sacrificing control.

How Gloves & Mitts Should Fit

A properly fitted ski racing glove or mitt should feel snug around the hand while allowing natural finger movement and a secure grip on the ski pole. Most race gloves are pre-curved to match the natural position of the hand while skiing.

  • Fingers should reach close to the end of the glove without pressing firmly against the material.
  • You should be able to comfortably grip a ski pole without excess bunching.
  • The glove should feel secure around the palm and back of the hand.
  • Wrist closures should hold the glove in place without restricting circulation.
  • Mitts should allow slight finger movement inside the insulated compartment.

Common Glove & Mitt Fit Mistakes

  • Choosing gloves that are too tight and restrict circulation.
  • Purchasing gloves that are too large and reduce dexterity.
  • Ignoring the fit while gripping a ski pole.
  • Selecting a size based only on age rather than hand measurements.
  • Overlooking finger length when evaluating overall fit.

Race Place Fit Notes

  • Race gloves are designed to fit closer than recreational ski gloves.
  • Mitts generally provide greater warmth than gloves in cold conditions.
  • Most race gloves are pre-curved to improve pole grip and reduce hand fatigue.
  • Proper circulation is critical for warmth, even in heavily insulated gloves.
  • Fit may vary between brands and models, so always refer to the manufacturer's size chart when available.

Description & Features

The LEKI JR WCR Venom 3D Mitts are built for junior alpine ski racers who need warmth, substantial hand protection, and precise pole control during gate training and competition. An integrated Speed Panel protects the central knuckle area, while surrounding silicone and EVA cushioning helps absorb impacts when clearing gates.

Premium goatskin and silicone-reinforced grip areas provide durable, secure contact with the pole, while the junior-specific Race Fit positions the hand naturally around the grip. Thinsulate and Hyperloft insulation provide reliable warmth, and internal Finger Channels individually position the fingers to improve fit and control while retaining the cold-weather benefits of a mitt.

Key Features

  • Mitten construction provides junior racers with warm, race-specific hand protection
  • Integrated Speed Panel and surrounding cushioning help protect the knuckle and hand during gate impacts
  • Internal Finger Channels improve finger positioning, fit, warmth, and pole control
  • Ceramic reinforcement improves abrasion resistance in exposed, high-wear areas
  • Pro Glide Zone creates smooth transitions across protective panels for cleaner contact with gates
  • Premium goatskin palm and silicone grip reinforcement provide secure pole contact
  • Trigger System creates a direct mitt-to-pole connection with compatible LEKI Trigger poles
  • Pre-curved Junior Race Fit supports precise pole handling without unnecessary bulk
  • Thinsulate and Hyperloft insulation provide dependable warmth for training and race days

Specs

  • Use: Junior alpine ski racing and race training
  • Fit: Junior Race Fit
  • Palm Materials: Premium goatskin leather, 100%; Silicone Nash, 60% nylon / 40% polyurethane
  • Insulation: Thinsulate, 65% polyolefin / 35% polyester; Hyperloft, 100% polyester
  • Lining: Micro Bemberg, 100% polyester
  • Grip System: Trigger System
  • Waterproof Level: Water-resistant components
  • Warmth Level: 4/5 – Warm
  • Unit: Sold as a pair

Construction & Technology

Trigger System

The Trigger System creates a direct connection between the mitt and compatible LEKI Trigger poles. Junior racers can quickly click in and release while maintaining a precise connection between the hand and pole.

Flex Mapping

Flex Mapping strategically coordinates flexible areas throughout the mitt so the hand can move naturally around the pole while maintaining the protective structure needed for ski racing.

Speed Panel

The integrated TPU Speed Panel covers the central knuckle area and provides impact damping during gate contact. Its ergonomic shape follows the hand to balance protection with the mobility required for aggressive pole handling.

Silicone Surround Cushion

Flexible silicone and EVA pads surround the Speed Panel to extend cushioning around the hand, providing additional impact protection during slalom training and competition.

Pro Glide Zone

Smooth transitions between protective panels minimize pronounced edges across the mitt, helping the hand glide more cleanly during contact with gates or the snow.

Ceramic Shell

Ceramic reinforcement creates a highly abrasion-resistant surface in exposed areas of the mitt, improving durability against repeated gate contact and demanding race use.

Grip Zone

The ergonomically shaped palm uses silicone reinforcement to increase traction at the pole interface, helping junior racers maintain consistent grip through starts, turns, and pole plants.

Junior Race Fit

The close-fitting, pre-curved construction follows the hand's natural gripping position around the pole. This race-specific shape supports secure contact and precise pole control without unnecessary bulk.

Finger Channels

Finger-shaped internal channels are built into the mitt lining to position each finger individually. This improves fit and pole control while helping retain warmth within the surrounding mitten construction.

Flex Cuff

The flexible neoprene cuff makes the mitt easier to put on and remove while providing a close, comfortable fit around the wrist.

Thinsulate & Hyperloft Insulation

Thinsulate and Hyperloft synthetic insulation retain heat around the hand for dependable warmth during cold training sessions, lift rides, and time spent waiting for a race start.

Micro Bemberg Lining

Micro Bemberg provides a soft, warm interior with hydrophobic, fast-drying properties that help maintain comfort throughout long days of training and competition.


Recently viewed