Leki JR WCR PRO TR Gloves
Leki JR WCR PRO TR Gloves
Leki JR WCR PRO TR Gloves
Leki JR WCR PRO TR Gloves
Leki JR WCR PRO TR Gloves
Leki JR WCR PRO TR Gloves
Leki JR WCR PRO TR Gloves
Leki JR WCR PRO TR Gloves
Leki JR WCR PRO TR Gloves

Leki JR WCR PRO TR Gloves

26266A

Racer Price
Regular price $230.00 Sale price$175.00 Save 24%
/
Shipping calculated at checkout.

Color
Size

Properly fitted ski racing gloves and mitts improve warmth, comfort, pole control, and protection. A glove that is too tight can restrict circulation and reduce warmth, while a glove that is too loose can reduce dexterity and make it harder to maintain a secure grip on the ski pole.

How to measure hand circumference for ski racing gloves and mitts

Measure around the widest part of the hand, excluding the thumb.

Quick Navigation: Sizing | Proper Fit | Fit Notes

How to Measure for Gloves & Mitts

Wrap a flexible measuring tape around the widest part of your hand, typically across the knuckles, while excluding the thumb. Record the measurement in inches and compare it to the manufacturer's size chart.

If your measurement falls between sizes, consider how you prefer your gloves to fit. Racers seeking a close-performance fit often size down, while those prioritizing warmth may prefer sizing up.

General Glove & Mitt Sizing Guidelines

Hand Circumference Typical Size
6–7 in / 15–18 cm Junior Small
7–8 in / 18–20 cm Junior Large / Adult Small
8–9 in / 20–23 cm Adult Medium
9–10 in / 23–25 cm Adult Large
10+ in / 25+ cm Adult XL+
Race Place Tip: Use the pinch test when trying on gloves. You should be able to pinch approximately 1/4 inch (6 mm) of material at the fingertips. This extra space helps maintain circulation and warmth without sacrificing control.

How Gloves & Mitts Should Fit

A properly fitted ski racing glove or mitt should feel snug around the hand while allowing natural finger movement and a secure grip on the ski pole. Most race gloves are pre-curved to match the natural position of the hand while skiing.

  • Fingers should reach close to the end of the glove without pressing firmly against the material.
  • You should be able to comfortably grip a ski pole without excess bunching.
  • The glove should feel secure around the palm and back of the hand.
  • Wrist closures should hold the glove in place without restricting circulation.
  • Mitts should allow slight finger movement inside the insulated compartment.

Common Glove & Mitt Fit Mistakes

  • Choosing gloves that are too tight and restrict circulation.
  • Purchasing gloves that are too large and reduce dexterity.
  • Ignoring the fit while gripping a ski pole.
  • Selecting a size based only on age rather than hand measurements.
  • Overlooking finger length when evaluating overall fit.

Race Place Fit Notes

  • Race gloves are designed to fit closer than recreational ski gloves.
  • Mitts generally provide greater warmth than gloves in cold conditions.
  • Most race gloves are pre-curved to improve pole grip and reduce hand fatigue.
  • Proper circulation is critical for warmth, even in heavily insulated gloves.
  • Fit may vary between brands and models, so always refer to the manufacturer's size chart when available.

Description & Features

The LEKI Junior WCR PRO TR Gloves are built for junior alpine ski racers who need substantial hand protection, warmth, and secure pole control during training and competition. A Speed Panel and extended ceramic-reinforced EVA padding protect the fingers and back of the hand, while the Ceramic Enforced Silicone Surround Cushion adds flexible impact protection for demanding gate training.

A durable Ceramic Shell combines with premium goatskin and PU palm materials for abrasion resistance and dependable grip on the pole. Hyperloft and Thinsulate insulation provide LEKI's highest warmth rating, while the Micro Bemberg lining creates a soft, fast-drying interior. Junior Race Fit and a flexible neoprene cuff complete the race-specific construction.

Key Features

  • Junior-specific race construction combines hand protection, warmth, and precise pole control
  • Extended ceramic-reinforced EVA padding protects the fingers and back of the hand
  • Integrated Speed Panel provides impact damping across the central knuckle area
  • Ceramic-reinforced silicone cushioning adds flexible protection around the hand
  • Pro Glide Zone creates smooth transitions across protective surfaces for cleaner gate contact
  • Ceramic Shell construction improves abrasion resistance in exposed, high-wear areas
  • Premium goatskin and silicone-reinforced grip areas provide secure pole contact
  • Trigger System creates a direct glove-to-pole connection with compatible LEKI Trigger poles
  • Hyperloft and Thinsulate insulation provide Extra Warm protection for cold training and race days
  • Flex Cuff and Cuff Pull simplify entry and provide a secure fit around the wrist

Specs

  • Use: Junior alpine ski racing and race training
  • Fit: Junior Race Fit
  • Main Material: Ceramic Shell, 100% polyester
  • Palm: Premium goatskin, 100% leather; PU, 100% polyurethane
  • Cuff: Neoprene, 60% rubber / 40% polyester
  • Insulation: Hyperloft, 100% polyester; Thinsulate, 65% polyolefin / 35% polyester
  • Lining: Micro Bemberg, 100% polyester
  • Grip System: Trigger System
  • Waterproof Level: 3/5 – Water-resistant components
  • Warmth Level: 5/5 – Extra Warm

Construction & Technology

Trigger System

The Trigger System creates a direct connection between the glove and compatible LEKI Trigger poles. Junior racers can quickly connect and release while maintaining a precise glove-to-pole interface for responsive control.

Junior Race Fit

Junior Race Fit shapes the glove specifically for younger racers, providing a close race-oriented fit that supports secure grip and precise pole handling.

Speed Panel

The integrated flexible TPU Speed Panel covers the central knuckle area to provide impact damping. Its ergonomic shape follows the hand while maintaining the mobility required for race-specific pole handling.

Extended Ceramic Enforced EVA Padding

Ceramic-reinforced EVA foam padding extends across the fingers and back of the hand to provide additional protective coverage. The EVA helps cushion gate impacts, while the ceramic reinforcement increases abrasion resistance in exposed areas.

Ceramic Enforced Silicone Surround Cushion

Flexible silicone cushioning surrounds the primary protective area to extend impact protection around the hand. Ceramic reinforcement adds abrasion resistance for the repeated contact encountered during gate training and racing.

Pro Glide Zone

Protective panels and cushioning transition smoothly without pronounced edges, creating a streamlined surface that helps the glove move cleanly through contact with gates or the snow.

Ceramic Shell

Ceramic Shell reinforces the glove's outer surface for increased abrasion resistance, helping withstand repeated gate contact and other high-wear conditions encountered in alpine ski racing.

Silicone Enforced Grip Pads

Silicone reinforcement in the palm increases traction at the pole interface, helping junior racers maintain a consistent grip through starts, turns, and pole plants.

Flex Cuff

The flexible neoprene cuff makes the glove easier to put on and remove while providing a close, comfortable fit around the wrist.

Premium Goatskin

Premium goatskin provides a durable yet supple palm surface, supporting secure grip and natural hand movement around the pole.

Hyperloft & Thinsulate Insulation

Hyperloft and Thinsulate synthetic insulation retain heat around the hand to provide the glove's Extra Warm level of thermal protection for cold training sessions, lift rides, and race-day waiting periods.

Micro Bemberg Lining

Micro Bemberg provides a soft, warm interior with hydrophobic, fast-drying properties that help maintain comfort throughout long days of training and competition.


Recently viewed