Hestra JR Impact Racing Mitt
Hestra JR Impact Racing Mitt
Hestra JR Impact Racing Mitt
Hestra JR Impact Racing Mitt
Hestra JR Impact Racing Mitt
Hestra JR Impact Racing Mitt
Hestra JR Impact Racing Mitt
Hestra JR Impact Racing Mitt
Hestra JR Impact Racing Mitt
Hestra JR Impact Racing Mitt
Hestra JR Impact Racing Mitt
Hestra JR Impact Racing Mitt

Hestra JR Impact Racing Mitt

26304A

Sale
$200.00
/
Shipping calculated at checkout.
Color
Size
  • Low stock - 2 items left
  • Backordered, shipping soon

Properly fitted ski racing gloves and mitts improve warmth, comfort, pole control, and protection. A glove that is too tight can restrict circulation and reduce warmth, while a glove that is too loose can reduce dexterity and make it harder to maintain a secure grip on the ski pole.

How to measure hand circumference for ski racing gloves and mitts

Measure around the widest part of the hand, excluding the thumb.

Quick Navigation: Sizing | Proper Fit | Fit Notes

How to Measure for Gloves & Mitts

Wrap a flexible measuring tape around the widest part of your hand, typically across the knuckles, while excluding the thumb. Record the measurement in inches and compare it to the manufacturer's size chart.

If your measurement falls between sizes, consider how you prefer your gloves to fit. Racers seeking a close-performance fit often size down, while those prioritizing warmth may prefer sizing up.

General Glove & Mitt Sizing Guidelines

Hand Circumference Typical Size
6–7 in / 15–18 cm Junior Small
7–8 in / 18–20 cm Junior Large / Adult Small
8–9 in / 20–23 cm Adult Medium
9–10 in / 23–25 cm Adult Large
10+ in / 25+ cm Adult XL+
Race Place Tip: Use the pinch test when trying on gloves. You should be able to pinch approximately 1/4 inch (6 mm) of material at the fingertips. This extra space helps maintain circulation and warmth without sacrificing control.

How Gloves & Mitts Should Fit

A properly fitted ski racing glove or mitt should feel snug around the hand while allowing natural finger movement and a secure grip on the ski pole. Most race gloves are pre-curved to match the natural position of the hand while skiing.

  • Fingers should reach close to the end of the glove without pressing firmly against the material.
  • You should be able to comfortably grip a ski pole without excess bunching.
  • The glove should feel secure around the palm and back of the hand.
  • Wrist closures should hold the glove in place without restricting circulation.
  • Mitts should allow slight finger movement inside the insulated compartment.

Common Glove & Mitt Fit Mistakes

  • Choosing gloves that are too tight and restrict circulation.
  • Purchasing gloves that are too large and reduce dexterity.
  • Ignoring the fit while gripping a ski pole.
  • Selecting a size based only on age rather than hand measurements.
  • Overlooking finger length when evaluating overall fit.

Race Place Fit Notes

  • Race gloves are designed to fit closer than recreational ski gloves.
  • Mitts generally provide greater warmth than gloves in cold conditions.
  • Most race gloves are pre-curved to improve pole grip and reduce hand fatigue.
  • Proper circulation is critical for warmth, even in heavily insulated gloves.
  • Fit may vary between brands and models, so always refer to the manufacturer's size chart when available.

Description & Features

The Hestra Junior Impact Racing Mitt is a close-fitting alpine racing mitten built to give young racers protection, warmth, and reliable pole control in slalom and giant slalom. Treated goatskin leather provides a durable outer shell with dependable grip, while shock-absorbing padding across the backhand and fingers helps protect against repeated gate impacts. Reinforcement details add durability in high-wear areas for the demands of junior race training and competition.

External seams give the Hestra Junior Impact Racing Mitt a comfortable, precise feel around the pole, while the mitten construction provides added coverage and warmth for cold race days. G-Loft synthetic insulation maintains strong insulating performance even in wet conditions, and the soft Bemberg lining adds warmth and next-to-hand comfort. An elasticated wrist and adjustable Velcro closure create a secure fit and help keep snow out through training and race runs.

Key Features

  • Protective junior alpine racing mitten designed for slalom and giant slalom
  • Shock-absorbing padding on the backhand and fingers for gate impact protection
  • Flexible protection across the knuckle area
  • Treated goatskin leather for durability, grip, and protection from the elements
  • External seams improve comfort and precise pole contact
  • Reinforcement details in high-wear areas for added durability
  • G-Loft synthetic insulation maintains insulating performance in wet conditions
  • Soft Bemberg lining provides warmth and next-to-hand comfort
  • Mitten construction provides added coverage and warmth in cold conditions
  • Elasticated wrist helps create a close, secure fit
  • Adjustable Velcro wrist closure
  • Close-fitting race construction works with forearm protection

Specs

  • Use: Junior Slalom & Giant Slalom Ski Racing
  • Style: Junior Alpine Racing Mitt
  • Outer Material: Treated Goatskin Leather
  • Protection: Shock-Absorbing Padding on Backhand & Fingers
  • Insulation: G-Loft
  • Lining: Bemberg
  • Construction: External Seams
  • Closure: Adjustable Velcro Wrist Closure

Construction & Technology

Junior Race Impact Protection

Shock-absorbing padding across the backhand and fingers provides added protection against repeated contact with slalom and giant slalom gates. The flexible construction maintains hand movement and pole control while adding coverage to impact-prone areas.

G-Loft Insulation

G-Loft is a fine polyester-fiber insulation with high insulating capacity, including in wet conditions. It is quick drying, breathable, and highly compressible, providing warmth while supporting the mitt's close-fitting race construction.

Goatskin Leather & External Seams

Treated goatskin leather provides the durability, flexibility, and grip needed for alpine racing. Hestra's external seam construction places the seams away from pressure points inside the mitt for improved comfort and a precise connection between the hand and ski pole.

Bemberg Lining

Bemberg is a soft, warm polyamide fabric used as the mitt's next-to-hand lining. It adds comfort and insulation inside the close-fitting junior race construction.

Recently viewed

You may also like