Level SQ CF Mitt
Level SQ CF Mitt
Level SQ CF Mitt
Level SQ CF Mitt
Level SQ CF Mitt

Level SQ CF Mitt

25285A

Sale
Regular price $290.00 Sale price$145.00 Save 50%
/
Shipping calculated at checkout.

Color
Size
  • Low stock - 1 item left
  • Backordered, shipping soon

Properly fitted ski racing gloves and mitts improve warmth, comfort, pole control, and protection. A glove that is too tight can restrict circulation and reduce warmth, while a glove that is too loose can reduce dexterity and make it harder to maintain a secure grip on the ski pole.

How to measure hand circumference for ski racing gloves and mitts

Measure around the widest part of the hand, excluding the thumb.

Quick Navigation: Sizing | Proper Fit | Fit Notes

How to Measure for Gloves & Mitts

Wrap a flexible measuring tape around the widest part of your hand, typically across the knuckles, while excluding the thumb. Record the measurement in inches and compare it to the manufacturer's size chart.

If your measurement falls between sizes, consider how you prefer your gloves to fit. Racers seeking a close-performance fit often size down, while those prioritizing warmth may prefer sizing up.

General Glove & Mitt Sizing Guidelines

Hand Circumference Typical Size
6–7 in / 15–18 cm Junior Small
7–8 in / 18–20 cm Junior Large / Adult Small
8–9 in / 20–23 cm Adult Medium
9–10 in / 23–25 cm Adult Large
10+ in / 25+ cm Adult XL+
Race Place Tip: Use the pinch test when trying on gloves. You should be able to pinch approximately 1/4 inch (6 mm) of material at the fingertips. This extra space helps maintain circulation and warmth without sacrificing control.

How Gloves & Mitts Should Fit

A properly fitted ski racing glove or mitt should feel snug around the hand while allowing natural finger movement and a secure grip on the ski pole. Most race gloves are pre-curved to match the natural position of the hand while skiing.

  • Fingers should reach close to the end of the glove without pressing firmly against the material.
  • You should be able to comfortably grip a ski pole without excess bunching.
  • The glove should feel secure around the palm and back of the hand.
  • Wrist closures should hold the glove in place without restricting circulation.
  • Mitts should allow slight finger movement inside the insulated compartment.

Common Glove & Mitt Fit Mistakes

  • Choosing gloves that are too tight and restrict circulation.
  • Purchasing gloves that are too large and reduce dexterity.
  • Ignoring the fit while gripping a ski pole.
  • Selecting a size based only on age rather than hand measurements.
  • Overlooking finger length when evaluating overall fit.

Race Place Fit Notes

  • Race gloves are designed to fit closer than recreational ski gloves.
  • Mitts generally provide greater warmth than gloves in cold conditions.
  • Most race gloves are pre-curved to improve pole grip and reduce hand fatigue.
  • Proper circulation is critical for warmth, even in heavily insulated gloves.
  • Fit may vary between brands and models, so always refer to the manufacturer's size chart when available.

Description & Features

The Level SQ CF Mitt is engineered for ski racers who demand maximum performance and protection on the steepest slopes. Featuring waterproof goat leather and Superfabric® reinforcements, it combines durability with World Cup–proven performance. Horizontal knuckle pads provide added impact protection, while the Kirax Stimulator System enhances reactivity and coordination. Inside, Thinsulate™ insulation and a wool lining treated with Polygiene® keep hands very warm, dry, and fresh all day. Built with 60% organic content, this mitten delivers both sustainability and elite race performance.

Features

  • Very Warm rating: Warmth Index 4000 for extreme cold conditions
  • Waterproof goat leather with Superfabric® reinforcements
  • Horizontal knuckle protection pads for added safety
  • Kirax Stimulator System to maximize reaction time and coordination
  • Thinsulate™ insulation with wool lining and Polygiene® treatment
  • Custom Fit design for comfort and precision right out of the box
  • Durashield back cuff for added durability
  • Graphene lining for even heat distribution and thermal regulation
  • Finger lining inside mitten for warmth, comfort, and dexterity
  • Silicone grip and Dyneema® stitching for durability and control
  • 60% organic sustainable value for eco-conscious construction

Technical Information

Custom Fit

Technology that adapts the mitten to the shape of the hand for immediate comfort and precision grip without break-in time.

Thinsulate™ Insulation

Microfiber insulation that traps warm air efficiently. Its fine fibers create more air pockets, preventing cold spots and keeping hands warm without added bulk.

Polygiene® Stays Fresh Technology

An antibacterial treatment applied to the lining to control odor and bacteria growth. Keeps mittens fresher for longer, even after repeated use.

Kirax Stimulator System

An innovative insert designed to stimulate receptors on the back of the hand. Enhances reaction time, coordination, and overall performance during competition.

Superfabric®

Durable, lightweight material reinforced with ceramic coating. Provides excellent abrasion resistance and long-lasting protection in high-impact areas.

Graphene Lining

Advanced material that regulates heat by dispersing warmth evenly across the hand. Keeps hands at a consistent temperature in varying conditions.

Durashield Cuff Protection

Reinforced cuff design that increases durability and protects against wear from gates and equipment.

Dyneema® Stitching

High-strength stitching using ultra-strong Dyneema fibers. Ensures durability, flexibility, and resistance to cuts and abrasions.

Silicone Grip

Applied to the palm or finger areas to improve pole control and prevent slipping in wet or icy conditions.

Finger Lining Inside

Internal lining separates the fingers within the mitten, improving warmth retention, comfort, and dexterity.

Horizontal Knuckle Pads

Protective padding applied across the knuckles. Provides extra safety against gate impacts and added durability for racing conditions.

Sustainable Value

Constructed with 60% organic materials. Designed with sustainability in mind, reducing environmental impact while maintaining elite performance.


Recently viewed