Base BEAST
Base BEAST
Base BEAST
Base BEAST
Base BEAST
Base BEAST
Base BEAST
Base BEAST
Base BEAST

Base BEAST

Sale Regular price $20.00 Save Liquid error (snippets/product-template line 148): Computation results in '-Infinity'%

*Make color selection here.

Item:  3012   (Only -383 Left)

Base BEAST Diagram
Gripping the Base BEAST

The Base BEAST (Best Edge Accuracy Ski Tools) is the original precise base edge tuning guide used with any file or polishing stone measuring 4 inches or more to create the smoothest and fastest edge possible. Base BEAST is available in 0.5°, 0.75°, 1°, 1.5° or 2° bevels.

How to grip the BEAST? (see photo above)

Set the Base BEAST on your ski base with the file or stone resting on the stainless steel elevation strip & ski edge. Insert your left thumb into the cage on top of the file with your index finger on the tab. Grip the file and Base BEAST tongue with your right thumb and index finger with your thumb applying downward pressure on the file. Ensure that the guide feet are held against the ski edge. Pro Tip: Tuning is more comfortable and accurate with your arms extended rather than close to your body.

What Bevel Angle do you need?

General recommendations are 0.5° - 1° for most skiers and 1.5° - 2° for more advanced and technical skiers. Ski manufacturer's specifications and personal preference may vary.

Checkout our Edge Tuning Guide for more information and bevel recommendations.

Setting Your Initial Bevel Angle

Darken the base edge with a felt tip marker (Sharpies work great) to use as a visual guide. Pull the file and Base BEAST toward you in long strokes until the entire edge has been exposed. Caution: Do not continue base beveling after this initial set up, as this will create an over-beveled condition.

Finish & Maintain Base Edge with Polishing

Any filing procedure leaves minor striations in the edge material and is best followed with polishing. Using diamond stones with the Base BEAST allows you to polish your edges precisely at your initial bevel to create a smooth and super-fast edge. Pro Tip: Frequently moistening the stone with a lubricant such as BEAST Juice will keep the stone clean.

What is a Variable Base Bevel and how is it accomplished?

A variable base bevel is where the ski's tip and tail are beveled at a greater degree than the mid-section, creating slower edge engagement for more relaxed skiing. First, bevel the entire edge at the angle selected for the mid-section. Next, mark the edge at your desired transition areas (typically 15-20cm at the tip and 10-15cm at the tail) with a marker. Bevel the tip and tail sections at the greater bevel angle. Repeat this process with polishing stones. Finish by blending the bevel transitions with a polishing stone in the greater bevel angle Base BEAST.

Caution: Do not use a file to sharpen base edges after your edge geometry is established, as this will over bevel your edge and create a convex base. Use polishing stones in the Base BEAST to maintain smooth edges. Sharpen by filing the side edge.

Recreational Skier Bevel Recommendations

Average Recreational Skier Hard Snow Soft Snow
Base Edge Bevel
Side Edge Bevel 1° - 3° 1° - 2°
Advanced Recreational Skier
Base Edge Bevel .5° - 1°
Side Edge Bevel 2° - 3° 1° - 2°

Ski Racer Bevel Recommendations

Junior Racer Slalom GS SG & DH
Base Edge Bevel .5° - 1°
Side Edge Bevel 2° - 3° 2° - 3° 2° - 3°
World Class/Elite Racer
Base Edge Bevel .5° 5° - .75° .75° - 1°
Side Edge Bevel 3° - 4°

The angle ranges listed are variable depending on snow hardness, speed and your strength and skill level. A high level, technical skier tends to encounter hard and icy snow conditions. An increased bevel angle enables the base edge to be in immediate contact with the snow surface and side edges to penetrate deeper for better grip. A less experienced athlete may find that these extreme bevels tend to cause the ski to hook too quickly and edges to bite into the snow too much. This can cause erratic ski performance and possible knee injury.

Description & Features

#1 Ski Base Edge Beveler in the World!

BEAST's proven stainless steel and polycarbonate ski base edge file guide design is tremendously successful with ski tuning techs around the world. This uniquely designed ski base edger features angled side arms, a "tongue" file grip, and ergonomic finger rests, allowing for efficient cutting and an easy, comfortable grip. The stainless steel floating elevation bar tilts the file or stone at a precise angle for easy set-up and ski base edge bevel maintenance.

Why Base BEAST is #1

The polycarbonate used in the Base BEAST file guide frame is one of the toughest and most stable materials available. It is used in many high-tech applications, including eyeglass lenses, Blu-ray discs, and bulletproof shields.

The Base BEAST's accuracy is assured by a patented design, which maintains the ski base edge angle with a precise stainless steel elevation bar set at the optimum distance from the ski edge.

This durability of material combined with an accurate, easy-to-use design makes Base BEAST the #1 selling base edge beveler in the world!

Made in USA

Features

  • Precision Stainless Steel Elevation Bar
    Designed with the precise accuracy and gliding properties of a stainless steel elevation bar.
  • Swivel Elevation Bar Design
    Elevation bar swivels to always lie flat on the ski base for maximum accuracy and prevention of any possible base damage.
  • Polycarbonate Frame
    Constructed of durable, rigid polycarbonate for long life and is also soft enough to prevent edge damage, unlike metal frames that must rely on Delrin inserts that wear out easily.
  • Ergonomic Design
    Angled side arms for an efficient cutting angle, finger rests on side and tongue for an easy, comfortable grip.
  • Frame colors indicated base bevel.
    Choice of 0.5° Orange, 0.75° Green, 1° Red, 1.5° Blue, and 2° Black