Level Worldcup CF Glove
Level Worldcup CF Glove

Level Worldcup CF Glove

25280A

Sale
Regular price $340.00 Sale price$169.00 Save 50%
/
Shipping calculated at checkout.

Color
Size
  • Low stock - 4 items left
  • Backordered, shipping soon

Properly fitted ski racing gloves and mitts improve warmth, comfort, pole control, and protection. A glove that is too tight can restrict circulation and reduce warmth, while a glove that is too loose can reduce dexterity and make it harder to maintain a secure grip on the ski pole.

How to measure hand circumference for ski racing gloves and mitts

Measure around the widest part of the hand, excluding the thumb.

Quick Navigation: Sizing | Proper Fit | Fit Notes

How to Measure for Gloves & Mitts

Wrap a flexible measuring tape around the widest part of your hand, typically across the knuckles, while excluding the thumb. Record the measurement in inches and compare it to the manufacturer's size chart.

If your measurement falls between sizes, consider how you prefer your gloves to fit. Racers seeking a close-performance fit often size down, while those prioritizing warmth may prefer sizing up.

General Glove & Mitt Sizing Guidelines

Hand Circumference Typical Size
6–7 in / 15–18 cm Junior Small
7–8 in / 18–20 cm Junior Large / Adult Small
8–9 in / 20–23 cm Adult Medium
9–10 in / 23–25 cm Adult Large
10+ in / 25+ cm Adult XL+
Race Place Tip: Use the pinch test when trying on gloves. You should be able to pinch approximately 1/4 inch (6 mm) of material at the fingertips. This extra space helps maintain circulation and warmth without sacrificing control.

How Gloves & Mitts Should Fit

A properly fitted ski racing glove or mitt should feel snug around the hand while allowing natural finger movement and a secure grip on the ski pole. Most race gloves are pre-curved to match the natural position of the hand while skiing.

  • Fingers should reach close to the end of the glove without pressing firmly against the material.
  • You should be able to comfortably grip a ski pole without excess bunching.
  • The glove should feel secure around the palm and back of the hand.
  • Wrist closures should hold the glove in place without restricting circulation.
  • Mitts should allow slight finger movement inside the insulated compartment.

Common Glove & Mitt Fit Mistakes

  • Choosing gloves that are too tight and restrict circulation.
  • Purchasing gloves that are too large and reduce dexterity.
  • Ignoring the fit while gripping a ski pole.
  • Selecting a size based only on age rather than hand measurements.
  • Overlooking finger length when evaluating overall fit.

Race Place Fit Notes

  • Race gloves are designed to fit closer than recreational ski gloves.
  • Mitts generally provide greater warmth than gloves in cold conditions.
  • Most race gloves are pre-curved to improve pole grip and reduce hand fatigue.
  • Proper circulation is critical for warmth, even in heavily insulated gloves.
  • Fit may vary between brands and models, so always refer to the manufacturer's size chart when available.

Description & Features

The Level Worldcup CF Glove is built for ski racers who demand speed, performance, and safety. Designed with Custom Fit technology, it offers a precise feel right out of the box. Protective pads safeguard the back of the hand and fingers from gate impacts, while outside stitching maximizes pole grip. Premium waterproof goat leather, combined with Thinsulate™ insulation and Polygiene® treatment, ensures warmth, durability, and long-lasting freshness. Proven at World Cup and Olympic levels, this glove delivers confidence on the steepest slopes.

Features

  • Custom Fit design for ready-to-wear comfort
  • Protective pads on backhand and fingers for gate impact safety
  • Outside stitching for enhanced pole grip
  • Waterproof goat leather construction with Superfabric reinforcements
  • Thinsulate™ insulation for superior warmth without bulk
  • Wool lining with Polygiene® treatment to stay fresh
  • Hybrid cuff with Durashield back cuff protection
  • Kirax Stimulator System to enhance performance and responsiveness
  • Silicone grip and Dyneema stitching for durability
  • Graphene lining for added thermal regulation

Technical Information

Custom Fit

Technology that adapts the glove to the shape of the hand for immediate comfort and precision grip without break-in time.

Thinsulate™ Insulation

Microfiber insulation that traps warm air efficiently. Its fine fibers create more air pockets, preventing cold spots and keeping hands warm without added bulk.

Polygiene® Stays Fresh Technology

An antibacterial treatment applied to the lining to control odor and bacteria growth. Keeps gloves fresher for longer, even after repeated use.

Kirax Stimulator System

An innovative insert designed to stimulate receptors on the back of the hand. Enhances reaction time, coordination, and overall performance during competition.

Superfabric®

Durable, lightweight material reinforced with ceramic coating. Provides excellent abrasion resistance and long-lasting protection in high-impact areas.

Graphene Lining

Advanced material that regulates heat by dispersing warmth evenly across the hand. Keeps hands at a consistent temperature in varying conditions.

Durashield Cuff Protection

Reinforced cuff design that increases durability and protects against wear from gates and equipment.

Dyneema® Stitching

High-strength stitching using ultra-strong Dyneema fibers. Ensures durability, flexibility, and resistance to cuts and abrasions.

Silicone Grip

Applied to the palm or finger areas to improve pole control and prevent slipping in wet or icy conditions.

Outside Stitching

Seams placed on the exterior of the glove for a more comfortable interior feel and enhanced grip on ski poles.


Recently viewed