Shred Ski Race Protective Mitt
Shred Ski Race Protective Mitt
Shred Ski Race Protective Mitt
Shred Ski Race Protective Mitt

Shred Ski Race Protective Mitt

25306A

Sale
Regular price$250.00
/
Shipping calculated at checkout.

Color
Size
  • Low stock - 3 items left
  • Backordered, shipping soon

Properly fitted ski racing gloves and mitts improve warmth, comfort, pole control, and protection. A glove that is too tight can restrict circulation and reduce warmth, while a glove that is too loose can reduce dexterity and make it harder to maintain a secure grip on the ski pole.

How to measure hand circumference for ski racing gloves and mitts

Measure around the widest part of the hand, excluding the thumb.

Quick Navigation: Sizing | Proper Fit | Fit Notes

How to Measure for Gloves & Mitts

Wrap a flexible measuring tape around the widest part of your hand, typically across the knuckles, while excluding the thumb. Record the measurement in inches and compare it to the manufacturer's size chart.

If your measurement falls between sizes, consider how you prefer your gloves to fit. Racers seeking a close-performance fit often size down, while those prioritizing warmth may prefer sizing up.

General Glove & Mitt Sizing Guidelines

Hand Circumference Typical Size
6–7 in / 15–18 cm Junior Small
7–8 in / 18–20 cm Junior Large / Adult Small
8–9 in / 20–23 cm Adult Medium
9–10 in / 23–25 cm Adult Large
10+ in / 25+ cm Adult XL+
Race Place Tip: Use the pinch test when trying on gloves. You should be able to pinch approximately 1/4 inch (6 mm) of material at the fingertips. This extra space helps maintain circulation and warmth without sacrificing control.

How Gloves & Mitts Should Fit

A properly fitted ski racing glove or mitt should feel snug around the hand while allowing natural finger movement and a secure grip on the ski pole. Most race gloves are pre-curved to match the natural position of the hand while skiing.

  • Fingers should reach close to the end of the glove without pressing firmly against the material.
  • You should be able to comfortably grip a ski pole without excess bunching.
  • The glove should feel secure around the palm and back of the hand.
  • Wrist closures should hold the glove in place without restricting circulation.
  • Mitts should allow slight finger movement inside the insulated compartment.

Common Glove & Mitt Fit Mistakes

  • Choosing gloves that are too tight and restrict circulation.
  • Purchasing gloves that are too large and reduce dexterity.
  • Ignoring the fit while gripping a ski pole.
  • Selecting a size based only on age rather than hand measurements.
  • Overlooking finger length when evaluating overall fit.

Race Place Fit Notes

  • Race gloves are designed to fit closer than recreational ski gloves.
  • Mitts generally provide greater warmth than gloves in cold conditions.
  • Most race gloves are pre-curved to improve pole grip and reduce hand fatigue.
  • Proper circulation is critical for warmth, even in heavily insulated gloves.
  • Fit may vary between brands and models, so always refer to the manufacturer's size chart when available.

Description & Features

The SHRED Ski Race Protective Mitt gives racers reliable impact protection and warmth in one mitt. Its SLYTECH™ foam covers the knuckles and thumb, while PrimaLoft® insulation keeps your hand warm without bulk. SuperFabric® armor resists abrasion on tough contact, and the Tacky Grip™ palm locks in pole control. A soft nose wipe and wrist overlay for arm guard compatibility round out the design. 

Features

  • SLYTECH™ foam on knuckles & thumb for impact absorption
  • PrimaLoft® insulation to retain warmth, even when damp
  • SuperFabric® armor for durability on high-wear zones
  • Tacky Grip™ palm for secure pole handling
  • Thumb protection pad to reduce skier’s thumb risk
  • Soft fleece nose wipe built in
  • Wrist overlay panel compatible with arm guards

Specs

  • Construction: Knuckle & thumb SLYTECH™ foam, SuperFabric® inserts
  • Materials: SLYTECH™, SuperFabric®, PrimaLoft®, Tacky Grip™ leather
  • Included: One pair of SHRED Ski Race Protective Mitts
  • Sizes: XS - XL (check size chart)

Technology

SLYTECH™ Foam

Intelligently adapts to impact speed — flexible during your run, firm on crash — to absorb forces without stiffness.

PrimaLoft® Insulation

Ultra-fine fiber insulation that traps warmth even when damp, giving you comfortable warmth without bulk.

SuperFabric® Armor

Armor plates built to protect against abrasion from gates, maintaining durability in high-contact zones.

Tacky Grip™ Palm

High-friction leather palm that keeps your grip secure on poles in wet or icy conditions.

Wrist Overlay & Nose Wipe

Wrist overlay ensures glove mates smoothly with arm guards, and a built-in nose wipe adds convenience on cold runs.


Recently viewed