Choice of Austrian World Cup Champions for over 30 years and now several US Ski Team athletes including Ted Ligety have moved to Komperdell. Constructed of a 18mm rigid high strength aluminum shaft. Features mini-disc race baskets and World Cup style grip. Compatible with SL pole guards. (Note: SL poles are straight and GS poles have a mild bend.)
Special Handling and Shipping:
To Mainland US - 2nd & Next Day Rates have a $10 Oversize Charge.
To Canada or Alaska - Ground Only + $10 Oversize Charge. (Expedited Rate by Quote.)
- Rubber race grip
- Race strap
- High-density aluminum alloy 7075-T6
- 18 mm
- Mini race basket
- Steel tip
How to Size Ski Poles
How do you determine what length pole is required? The chart on this page can be used as a general guide and is based on height. The most common "old time" method is to invert the pole with the grip on the floor and grab the shaft under the basket. The pole is a good fit if your forearm is at 90 degrees (or parallel to the floor).
This is a good starting point, but personal preference may dictate a slightly shorter pole in modern day slalom where racers attack in a little lower body position and the pole plant becomes awkward if the pole is too long.
GS/SG and DH poles are typically longer for a stronger push out of the start and pole planting is not an issue.
Select a longer pole if in doubt as most shafts can be cut down to size, but it is quite impossible to add length. (Note: Cutting down GS/SG and DH poles is a bit more complicated due to the bend of the pole. They may be cut down some, but keep in mind the placement of the bend relative to the body while in a tuck, before making this decision.) It may seem obvious to some, but always cut from the top of the pole. We have calls each year by someone, who obviously shouldnäó»t be allowed to play with tools, asking just this question.
Ski Pole Sizing Guide
|Height (inches)||Pole Length (inches)||Pole Length (centimeters)|
This chart is for SL or recreational skiing.
For GS, SG and DH you may want to choose pole 2" longer.
HIGH-DENSITY ALUMINIUM 7075-T6
Elaborately and repeatedly treated high-density aluminium tube, for a long time proven and extremely stiff.